Development of technologies aiding large-tissue engineering

Apoptosis associated oligonucleosomal fragmentation of DNA can result from the activation of endonucleases that exhibit different pH optima and are either sensitive or insensitive to divalent cations. DNA fragmentation due to activation of cation sensitive endonucleases occurs in the absence of a change in intracellular pH whereas intracellular acidification is a feature of apoptosis characterized by activation of cation insensitive acidic endonuclease. We have reported earlier that somatostatin (SST) induced DNA fragmentation and apoptosis is signaled in a receptor subtype selective manner uniquely via human somatostatin receptor subtype 3 (hSSTR3). In the present study we investigated the pH dependence and cation sensitivity of endonuclease induced in hSSTR3 expressing CHO-K1 cells by the SST agonist octreotide (OCT) and its effect on intracellular pH. We show that OCT induced apoptosis is associated with selective stimulation of a divalent cation insensitive acidic endonuclease. The intracellular pH of of cells undergoing OCT induced apoptosis was 0.9 pH units lower than that of control cells. The effect of OCT on endonuclease and pH was inhibited by orthovanadate as well as by pretreatment with pertussis toxin, suggesting that hSSTR3 initiated cytotoxic signaling is protein tyrosine phosphatase mediated and is G protein dependent. These findings suggest that intracellular acidification and activation of acidic endonuclease mediate wild type p53 associated apoptosis signaled by hormones acting via G protein coupled receptors.     

The Old-Age Healthy Dependency Ratio in Europe

The aim of this study is to answer the question of whether improvements in the health of the elderly in European countries could compensate for population ageing on the supply side of the labour market. We propose a state-of-health-specific (additive) decomposition of the old-age dependency ratio into an old-age healthy dependency ratio and an old-age unhealthy dependency ratio in order to participate in a discussion of the significance of changes in population health to compensate for the ageing of the labour force. Applying the proposed indicators to the Eurostat's population projection for the years 2010-2050, and assuming there will be equal improvements in life expectancy and healthy life expectancy at birth, we discuss various scenarios concerning future of the European labour force. While improvements in population health are anticipated during the years 2010-2050, the growth in the number of elderly people in Europe may be expected to lead to a rise in both healthy and unhealthy dependency ratios. The healthy dependency ratio is, however, projected to make up the greater part of the old-age dependency ratio. In the European countries in 2006, the value of the old-age dependency ratio was 25. But in the year 2050, with a positive migration balance over the years 2010-2050, there would be 18 elderly people in poor health plus 34 in good health per 100 people in the current working age range of 15-64. In the scenarios developed in this study, we demonstrate that improvements in health and progress in preventing disability will not, by themselves, compensate for the ageing of the workforce. However, coupled with a positive migration balance, at the level and with the age structure assumed in the Eurostat's population projections, these developments could ease the effect of population ageing on the supply side of the European labour market.     

Automotive observers based on multibody models and the extended Kalman filter

This work is part of a project aimed to develop automotive real-time observers based on detailed nonlinear multibody models and the extended Kalman filter (EKF). In previous works, a four-bar mechanism was studied to get insight into the problem. Regarding the formulation of the equations of motion, it was concluded that the state-space reduction method known as matrix-R is the most suitable one for this application. Regarding the sensors, it was shown that better stability, accuracy and efficiency are obtained as the sensored magnitude is a lower derivative and when it is a generalized coordinate of the problem. In the present work, the automotive problem has been addressed, through the selection of a Volkswagen Passat as a case-study. A model of the car containing fifteen degrees of freedom has been developed. The observer algorithm that combines the equations of motion and the integrator has been reformulated so that duplication of the problem size is avoided, in order to improve efficiency. A maneuver of acceleration from rest and double lane change has been defined, and tests have been run for the “prototype,” the “model” and the “observer,” all the three computational, with the model having 100 kg more than the prototype. Results have shown that good convergence is obtained for position level sensors, but the computational cost is high, still far from real-time performance.     

Nachweis von Maillard-Produkten in Malzen, Bieren und Braucouleuren

Zusammenfassung Bei der Maillard-Reaktion reagieren primär reduzierende Zucker mit den freien Aminogruppen der Aminosäuren. Dabei entstehen aus Aldosen als erste stabile Zwischenprodukte die 1-Aminosäure-1-desoxy-ketosen (Amadori-Verbindungen). In Malzen konnten zehn Amadori-Verbindungen quantitativ bestimmt werden. Sie entstehen während des Darrens des Malzes. Aufgrund unterschiedlicher Darrbedingungen unterscheiden sich die Malztypen im Gehalt und im Muster dieser Substanzen. Während der Erhitzungsvorgänge beim Brauprozeß (Maischen, Würzekochung) werden die Amadori-Verbindungen etwa zur Hälfte abgebaut, dagegen sind bei der an schließenden Gärung keine Veränderungen zu beobachten. Aus dem Gehalt und dem Muster der Amadori-Verbindungen im Bier können somit Rückschlüsse auf das verwendete Malz gezogen werden. Bei der Herstellung von Braucouleuren werden Ammoniak bzw. Ammoniumverbindungen als Aminokomponenten eingesetzt. Die Couleure enthalten deshalb keine 1-Aminosäure-l-desoxy-ketosen, dafür aber Desoxyfructosazine, die bei der Reaktion von Zuckern mit Ammoniak entstehen. Diese Pyrazinderivate wurden in Braucouleuren in hohen Mengen (2–6 g/100 g) gefunden. Es wird eine Methode vorgestellt, mit der ein Zusatz von Braucouleuren zum Bier über die Bestimmung der Desoxyfructosazine eindeutig nachgewiesen werden kann.

---

Detection of Maillard products in malts, beers, and brewing couleurs

During the Maillard reaction, the reducing sugars first react with the free amino groups of the amino acids. With aldoses, 1-amino-l-deoxyketoses (ketose-amino acids, Amadori compounds) are the first stable intermediates to be formed. In malts ten different Amadori compounds could be determined that formed during the kiln-drying of malt. Dependent on the kiln-drying conditions, the different types of malt contain different amounts and proportions of these compounds. During the brewing process (mashing, mash wort cooking) about half of the Amadori compounds are decomposed, whereas during fermentation no changes can be observed. Therefore the amount and composition of Amadori compounds detected in beer may indicate the type of malt used. During the production of brewing couleurs, ammonia or ammonium compounds react with sugars and deoxyfructosazines are formed. In brewing coleurs, relatively high amount of these pyrazine derivatives (2–6 g/100 g) could be found. An analytical method is described for the quantitative determination of deoxyfructosazines, indicating an addition of brewing couleur to beer.

     

Gaschromatographisch-massenspektrometrische Untersuchung der im Modellsystem Cystein/Methionin/Furfural unter R?stbedingungen gebildeten Aromastoffe

Zusammenfassung Das Modellsystem Cystein/Methionin/Furfural lieferte unter Röstbedingungen ein komplexes Reaktionsgemisch, das sich mittels Adsorptionschromatographie auf Kieselgel und Capillar-GC in ca. 130 Komponenten auftrennen ließ, von denen 85 capillargaschromatographisch-massenspektrometrisch charakterisiert wurden. Furfural und die aus Cystein und Methionin resultierenden reaktiven Abbauprodukte H₂S, Cysteamin und Methylmercaptan sind wichtige Precursor für heterocyclische Flavorkomponenten. Neben Furanen, (Furan)-aldiminen und schwefelsubstituierten Furanderivaten werden auchN-Furfurylpyrrole, Pyridine, Thiazole, Thiazoline, Thiazolidine, Thiophene sowie aliphatische Schwefelverbindungen und cyclische Methylenpolysulfide gebildet. Beim Kaffeerösten entsteht Furfural als eine der Furanhauptkomponenten und spielt bei der Genese wesentlicher Kaffeearomastoffe eine zentrale Rolle.

---

Gaschromatographic-mass spectrometric investigation of aroma compounds from the reaction of cysteine and methionine with furfural under roasting conditions

Summary The model-system cysteine/methionine/furfural produced under roasting conditions a complex mixture of compounds which was separated by adsorption chromatography on silica gel, according to the increasing polarity of the components, into six fractions. The fractions were investigated by capillary gas chromatography with and without mass spectrometry. Of the approx. 130 compounds detected, 85 were identified and quantified. Furfural and the reactive degradation products H₂S, cysteamine and methylmercaptan, resulting from cysteine and methionine, are important precursors for heterocyclic flavor components. Besides furans, (furan)aldimines, and sulphur-substituted furan derivates, the following compounds are also formed:N-furfurylpyrroles, pyridines, thiazoles, thiazolines, thiazolidines, thiophenes, as well as aliphatic sulphur compounds and cyclic methylene polysulfides. During coffee roasting, furfural is produced as one of the major components of the furans and is essential for the formation of important coffee aroma constituents.

---

---

Poster-Präsentation beim Deutschen Lebensmittelchemikertag in Bremen (14.–16. Sept. 1988)     

Bestimmung des Herbicids Glyphosat und dessen Hauptmetabolit Aminomethylphosphons?ure (AMPA) in Trinkwasser mit Hilfe der HPLC

Zusammenfassung Es wird eine Methode zur Bestimmung von Glyphosat und dessen Hauptmetabolit Aminomethylphosphonsäure (AMPA) in Trinkwasser beschrieben, die es erlaubt, den in der Schweiz geforderten Toleranzwert von 0,1 g/1 zu erreichen (Nachweisgrenze 0,02 g/l). Die Wasserprobe wird dabei direkt mit 9-Fluorenylmethyl-chloroformaat (FMOCCI) versetzt, um extrahierbare und gleichzeitig fluorescierende Derivate zu erhalten. Diese werden nach Ausschütteln mit einem organischen Lösungsmittelgemisch durch HPLC mit Fluorescenzdetektor bestimmt. In bisher 151 untersuchten Trinkwasserproben des Kantons Bern konnten weder Glyphosat noch AMPA nachgewiesen werden.

---

Determination of glyphosate herbicide and its main metabolite aminomethylphosphonic acid (AMPA) in drinking water by HPLC

Summary A method for the determination of glyphosate and its major metabolite aminomethylphosphonic acid (AMPA) is described. With a detection limit of 0.02 g/l, the method suitably fulfills the requirements of the Swiss legislation (tolerance value of 0.1 g/l water). The compounds are derivatized directly in the original water sample with 9-fluorenylmethyl chloroformate (FMOCCI) in order to obtain extractable and fluorescent derivatives. These are extracted with organic solvents and determined by HPLC using a fluorescence detector. Neither of the compounds could be detected in 151 tap water samples from the Canton of Berne.

     

Post-Translational Modifications of Retroviral HIV-1 Gag Precursors: An Overview of Their Biological Role

Protein post-translational modifications (PTMs) play key roles in eukaryotes since they finely regulate numerous mechanisms used to diversify the protein functions and to modulate their signaling networks. Besides, these chemical modifications also take part in the viral hijacking of the host, and also contribute to the cellular response to viral infections. All domains of the human immunodeficiency virus type 1 (HIV-1) Gag precursor of 55-kDa (Pr55^Gag), which is the central actor for viral RNA specific recruitment and genome packaging, are post-translationally modified. In this review, we summarize the current knowledge about HIV-1 Pr55^Gag PTMs such as myristoylation, phosphorylation, ubiquitination, sumoylation, methylation, and ISGylation in order to figure out how these modifications affect the precursor functions and viral replication. Indeed, in HIV-1, PTMs regulate the precursor trafficking between cell compartments and its anchoring at the plasma membrane, where viral assembly occurs. Interestingly, PTMs also allow Pr55^Gag to hijack the cell machinery to achieve viral budding as they drive recognition between viral proteins or cellular components such as the ESCRT machinery. Finally, we will describe and compare PTMs of several other retroviral Gag proteins to give a global overview of their role in the retroviral life cycle.     

Insights into the Action Mechanism of the Antimicrobial Peptide Lasioglossin III

Lasioglossin III (LL-III) is a cationic antimicrobial peptide derived from the venom of the eusocial bee Lasioglossum laticeps. LL-III is extremely toxic to both Gram-positive and Gram-negative bacteria, and it exhibits antifungal as well as antitumor activity. Moreover, it shows low hemolytic activity, and it has almost no toxic effects on eukaryotic cells. However, the molecular basis of the LL-III mechanism of action is still unclear. In this study, we characterized by means of calorimetric (DSC) and spectroscopic (CD, fluorescence) techniques its interaction with liposomes composed of a mixture of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-rac-phosphoglycerol (POPG) lipids as a model of the negatively charged membrane of pathogens. For comparison, the interaction of LL-III with the uncharged POPC liposomes was also studied. Our data showed that LL-III preferentially interacted with anionic lipids in the POPC/POPG liposomes and induces the formation of lipid domains. Furthermore, the leakage experiments showed that the peptide could permeabilize the membrane. Interestingly, our DSC results showed that the peptide-membrane interaction occurs in a non-disruptive manner, indicating an intracellular targeting mode of action for this peptide. Consistent with this hypothesis, our gel-retardation assay experiments showed that LL-III could interact with plasmid DNA, suggesting a possible intracellular target.     

细磨活化对白钨矿浸取行为的影响SCIEI

本文研究了细磨活化对白钨矿浸取行为的影响.实验结果表明,细磨活化后白钨矿在HCl-Na_3PO_4介质中的浸出速率显著加快,钨的浸出率由原来的约8％提高到99％以上.红外光谱和X射线分析结果表明,细磨除了使白钨矿比表面积显著增大外,还在固体的表面和内部产生缺陷结构,增加了矿物表面的反应活性,改善了白钨矿的分解,使得白钨矿的浸出能在较低的温度顺利进行。     

A kinetic study of the adsorption and desorption process of two commercial molecular sieves

A mathematical model and its numerical solution is presented to describe adiabatic adsorption—desorption processes in a fixed bed when the mass and heat transfer can be described by external film transfer coefficients only, which is especially interesting in the case of non-uniform, irregular particles. A new method to measure such rates is presented, based on continuous weighing of a through-circulated bed. The measured rates can be checked against the difference in humidity and temperature between the outlet and inlet air in order to minimize errors.The comparison between experimental results and calculations showed that the adsorption process in a bed of molecular sieve pellets can not be described with a constant mass transfer coefficient; the desorption process is better described although not entirely satisfactorily. In the case of a honeycomb molecular sieve, a constant mass transfer coefficient described both the adsorption and desorption processes satisfactorily.